dbx 215S Dual Channel 15 Band 2/3 Octave Graphic Equalizer

 DBX 215SV


Product Description

The DBX 215S Dual Channel 15 Band Graphic Equalizer meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straight forward controls. The DBX 215S graphic equalizer includes two 15 band channels of 2/3-octave equalization, +/-12 dB input gain, switchable +/-6 dB or +/-12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering.

DBX 215S Dual Channel 15 Band Graphic Equalizer Features:

  • Dual 15 band, 2/3 octave Constant Q frequency bands
  • Switchable boost/cut ranges of +/-6 or +/-12 dB
  • Front panel bypass switch
  • +/-12 dB input gain range
  • 4 segment LED ladders for monitoring output levels
  • XLR and TRS Inputs and Outputs
  • Frequency Response of <10Hz to >50kHz
  • Dynamic range of greater than 108dB

From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 215S offers exceptional sound and rugged reliability that guarantees you will always sound your best.

Sure to find a home in the studio, on tour and with installed sound venues, the DBX 215S graphic equalizer is destined to take its rightful place in the lineage of great dbx signal processors that are the professional’s choice in signal processing. With such affordable quality, there’s no longer any excuse for compromising your sound.

Product Specifications

DBX 215S Dual Channel 15 Band Graphic Equalizer Specifications

  • Inputs:
    • Connectors: 1/4 inch TRS, female XLR (pin 2 hot)
    • Type: Electronically balanced/unbalanced, RF filtered
    • Impedance: Balanced 40k ohm, unbalanced 20k ohm
    • Max Input Level: >+21dBu balanced or unbalanced
    • CMRR: >40dB, typically >55dB at 1kHz
  • Outputs:
    • Connectors: 1/4 inch TRS, male XLR (pin 2 hot)
    • Type: Impedance balanaced/unbalanced, RF filtered
    • Impedance: Balanced 100 ohm, unbalanced 50 ohm
  • System Performance:
    • Bandwidth: 20Hz to 20kHz, +0.5/-1dB
    • Frequency Response: <10Hz to >50kHz, +0.5/-3dB
    • Dynamic Range: Typically >112dB
    • Signal-to-Noise: Typically >95dB
    • THD+Noise: <0.003%
    • Interchannel Crosstalk: <-90dB, 20Hz to 20kHz
  • Function Switches:
    • EQ Bypass: Bypasses the graphic equalizer section in the signal path
    • Low Cut: Activates the 50Hz 12dB/octave high-pass filter
    • Range: Selects either +/- 6dB or +/- 12dB slider boost/cut range
  • Power Supply:
    • Operating Voltage: 100VAC-240VAC 50/60Hz
    • Power consumption: 15W
    • Mains Connection: IEC receptacle
  • Physical:
    • Weight: 4.8 pounds (2.2 kg)
    • Dimensions(HxDxW): 1.75  x 6 x 19 inches (4.4 x 15.24 x 48.26 cm)

Helpful Info about the Manufacturer

Phone:  801-568-7660 Warranty:  2 Years